|
Tractor Talk Discussion Board |
starter/solenoid
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Gus on January 01, 2004 at 07:09:55 from (205.188.208.73):
Tried to start my JD450B after it sat for 2 months. Turned over a few times, battery died. Charged it hit the starter button, nothing. Put the charger on 200 amp boost, nothing.It has a key and starter button. When I hit the button, amp guage shows a draw. Put the jump cable directly on the solenoid with good ground, nothing. Took the solenoid off, took the cap off, cleaned the copper all up, wd40-ed everything. Putsolenoid back on, hit the button, nothing. Guage on dash still shows draw when I hit the button. Lights work so I,m pretty sure battery connections are good. Strter is fairly new (200 hours ago) It's a real bi%^h to change and expensive so I'm hoping it's something else. Would the amp guage show a draw if the starter button was bad and not the solenoid? Wouldn't the sloenoid at least click if it was OK and the starter was bad? Thanks for any input. Gus
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
12-Volt Conversions for 4-Cylinder Ford 2000 & 4000 Tractors - by Tommy Duvall. After two summers of having to park my old 1964 model 4000 gas 4 cyl. on a hill just in case the 6 volt system, for whatever reason, would not crank her, I decided to try the 12 volt conversion. After some research of convert or not, I decided to go ahead, the main reason being that this tractor was a working tractor, not a show tractor (yet). I did keep everything I replaced for the day I do want to restore her to showroom condition.
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
