|
Tractor Talk Discussion Board |
Re: Don't want to start a diesel truck battle, but
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jeff on November 29, 2003 at 21:40:57 from (209.173.42.37):
In Reply to: Don't want to start a diesel truck battle, but.... posted by Tom on November 28, 2003 at 06:50:16:
Aww heck might as well throw mine in here too. We have both and Dodge and a Ford. WE did have a ford one ton with 4:11's before that and that is how the Dodge is set up as well. The Ford we have now is a one ton with 3:56? 3:70? It is a 96 3/4 ton so what ever they put in them is what it has. Dodge will pull a load easier and hold it's speed and RPM better than either of the other. Usual loads are around 15k-20k on gooseneck trailers. Ford one ton would average about 13 mpg empty and about 9 loaded. Dodge one ton will get about 15-16 empty and 11-13 loaded. Running empty most of the time at about 65-70, loaded around 55-60. The Ford 3/4 ton will get about 17-19 empty and around 11-12 loaded. Fords ride and drive better but that might be because the Dodge has the solid front axle and sits up like a 4wd. All of these are 1996 trucks so their wasn't am major change in them for comparison. WE had more trouble from the Ford one ton than we have had so far on the others. Ford 1 ton had 90K on it when we sold it, Dodge has about 90k on it now and the Ford 1 ton has 179k on it.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|