Re: Want to Talk to Experienced Engine Rebuilder

Posted by Bill(IN) on November 24, 2003 at 06:56:10 from (209.132.171.34):

In Reply to: Want to Talk to Experienced Engine Rebuilder posted by moonlite on November 23, 2003 at 16:31:13:

Surface hardening is just what it implies. It is very thin and any grinding removes it, that's part if the reason bearings are made of soft material. I have built many racing engines and turned the crank journals down to use rods from other engines that had smaller rod throws. It is common practice to offset grind rod throws for a longer stroke, taking a lot off of the back side of it. As long as it is done properly, it isn't a problem. My 2 cents worth

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Want to Talk to Experienced Engine Rebuilder Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]