Re: Want to Talk to Experienced Engine Rebuilder

Posted by raytasch on November 23, 2003 at 18:28:35 from (209.165.11.97):

In Reply to: Want to Talk to Experienced Engine Rebuilder posted by moonlite on November 23, 2003 at 16:31:13:

I, too, have heard the stories about not going less than .030 under. I've heard the hardening stories. I have seen low speed engines run with .060 undersize and do well for many hours/years. I have in my shop two sets of Federal Mogul bearings for a Ford N engine that are .060 under. Main# 567 M 60 and rods are 1055 CP60. Going .060 under is not my idea of the ideal situation but I figure someday I or someone will be glad to use them.
ray

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Want to Talk to Experienced Engine Rebuilder Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]