Re: 300 utility starter problem

Posted by JMS/MN on November 10, 2003 at 22:57:30 from (65.178.209.58):

In Reply to: 300 utility starter problem posted by bryan kern on November 09, 2003 at 10:50:47:

A lot of starter problems are caused by poor cable connections, wrong size replacement cables, not checking the ground cable connection to the frame. These tractors worked fine many years ago when they left the factory, so before you make major changes, check the basics. If you have replacement lugs on the battery terminals- throw them away and get decent new cables with proper ends on them. Clean the battery posts. Clean the battery ground cable where it contacts the tractor. Clean the contacts inside the starter solenoid. Charge the battery. Voila! the sucker starts!!!!!!!!!

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 300 utility starter problem Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]