Re: Opinions/Tips on radiant heat

Posted by MarkB on November 07, 2003 at 19:38:28 from (64.79.81.239):

In Reply to: Opinions/Tips on radiant heat posted by I Like Case on November 07, 2003 at 07:04:36:

I just poured the floor in my shop. I went ahead and bit the bullet and prepped it for radiant heat. 1000' ft of 1/2 in. PEX for 1200 sq. ft. 2 in. high density foamboard insulation around the perimeter and under the outer 4 feet of the floor. 1 inch insulation under the rest. This was a lot of expense and aggravation, but you only get one chance to do it.

I plan on going the water heater route, too. It only requires about 25-30 Btu/hr per sq ft.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Opinions/Tips on radiant heat Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]