Re: which JD loader fits on a 3020?

Posted by fasting on November 01, 2003 at 14:31:28 from (67.75.7.158):

In Reply to: which JD loader fits on a 3020? posted by Perry Hazelwood on October 30, 2003 at 22:07:08:

The 46A was the vintage strong loader for a 3020,
stressed when used on a 4020. These loaders had axle housing boots, to bolt the sub-frame, and
a front bracket which required removing the cast
weights. If your 3020 has dual valves, you can
easily use the hydraulic bucket. There was a 46
loader, looked the same, but something must have
changed. The downside of the 46A, was it was not
a 'high lift', difficult to load many rack trucks,
Oliver was a cake walk. Good luck.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: which JD loader fits on a 3020? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]