Re: ether starting aids

Posted by RJ-AZ on October 27, 2003 at 04:14:00 from (171.75.23.222):

In Reply to: ether starting aids posted by Bryan on October 25, 2003 at 23:42:08:

To answer your question ; you should be able to get an ether kit at your NAPA or a heavy truck parts place. A good kit should have all the plumbing needed and also a heat sensor to deactivate the system after warmup. Had an Aussie truck driver on time that was consistently out pulling me on a long grade, asked him what he was doing and he replied "Oh ya know mate push the button count to 3 and do it again".

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: ether starting aids Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]