Re: Re: Hydraulic question

Posted by Dan on September 26, 2003 at 19:09:34 from (12.160.160.171):

In Reply to: Re: Hydraulic question posted by Ernie Bob on September 25, 2003 at 22:00:18:

Pictures would be good if you can. It sounds like your setup is plumbed about like mine. Originally the pressure line Td to the inlet of the IH valve and then went on to the lift all. Return from lift all has T that goes to return of IH valve. According to instructions you can use the lift all or the remote valve but not both at the same time. You have to lock the lever foreward on lift all when using the remote or lock the remote if using lift all. I basically put the the new valve and old IH valve in series. Both work ok other than lifting new valve. The new valve I'm using came off of a wood splitter. Wondering if maybe it is not spring centered or something. Thanks for the help.

Follow Ups:

• Re: Re: Re: Hydraulic question Dan 23:03:22 09/26/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Hydraulic question Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]