Re: Need Massey Ferguson Help

Posted by rod on September 23, 2003 at 13:19:53 from (142.177.104.141):

In Reply to: Need Massey Ferguson Help posted by Lynn on September 23, 2003 at 12:23:06:

I have only worked on my MF 220 backhoe and found that the control valves are stacked that is there are orings between each section and all kinds inside it. I also found quite a few hoses were shot only way to find out is to clean it all up very good and then look for source of leak a shop manual is a must for this type of work also if you get old orings out they can usually be matched by a hydraulic shop much cheaper than the dealer. Not the answers you want but that is all I know. PS has to be very clean for disassembly and mark all hoses as you take them off.
regards
rod

Follow Ups:

• Re: Re: Need Massey Ferguson Help Lynn 05:08:57 09/24/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Need Massey Ferguson Help Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]