Re: JD 1010R

Posted by Bob on September 19, 2003 at 09:21:29 from (66.163.134.177):

In Reply to: JD 1010R posted by Fence on September 19, 2003 at 08:35:10:

Have patience with the little 1010... they're a much maligned little tractor, but a nice little tractor to have around.

Get your timing set to spec, check the fuel filter, and drain the carburetor, if you can, to get rid of any crud sloshing around the bottom of the float bowl. Check and/or change the antifreeze, engine and rear end oil, and the air filter.

Now warm the tractor up under a load, and after it has run for a while and has been worked a little, THEN you can begin to get a feel for the shape it's in.

Good luck!

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: JD 1010R Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]