Re: Farmall B transmission

Posted by gene b on September 08, 2003 at 03:14:44 from (65.227.53.8):

In Reply to: Farmall B transmission posted by dan agius on September 07, 2003 at 19:09:34:

drive the pin out where the shift lever pivots lift the shift lever out and look inside you will see the rails they want to be all lined up this will be in neutral. Your pin that you drove out may be worn or the end of the shift lever needs to be built up. Tying the clutch depressed will help in moving the shift rails to the neutral position. You can also remove the top cover of the transmission instead of removing pin.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall B transmission Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]