Oil in water

Posted by Mark on September 05, 2003 at 09:48:28 from (163.150.137.68):

I have a 722 Bobcat that was in a flood. It now has a new engine. Both the gas tank and the hydraulics got water in them. I used gas line drier chemicals and a fuel seperator on the fuel system, although there is still some water it seems to run fine.
But the hydraulic system is a different story. I drained the storage tank and put in fresh oil. The question is how can I get the rest of the water out of the pump and lines? Are ther any chemicals or can I just open lines until they pump clear.
Amazingly everything works fine despite the water.
Any ideas would be appreciated.

Follow Ups:

• Re: Oil in water rod 10:14:20 09/05/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Oil in water Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]