Re: Case model V (or VA) clutch specification need

Posted by rod on September 04, 2003 at 14:34:51 from (142.177.92.128):

In Reply to: Case model V (or VA) clutch specification needed ? posted by Alberta Mike on September 03, 2003 at 09:45:02:

I have the I and T shop manual it says for VA clutch adjust springs to 185 to 204 pounds and height of 2 and 1/8th inches with new clutch plate or using a .320 gage in lieu of a plate.
email me I can send you a scan of it if you need one.
regards
rod

Follow Ups:

• Re: Re: Case model V (or VA) clutch specification Alberta Mike 09:29:28 09/05/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Case model V (or VA) clutch specification need Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]