|
Tractor Talk Discussion Board |
Re: question for tractor haulers
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by john on August 24, 2003 at 06:29:40 from (67.35.123.208):
In Reply to: question for tractor haulers posted by novice on August 21, 2003 at 20:28:03:
well I stopped at our state scale last night to ask about your situation so as not to give you false info. I found out they do not allow interstate movement anymore with farm tags just 150 miles from your house now. so this takes you out of farm statis and into private carrier statis.with this you fall under all of the commercial vechial laws.you can get a 48 hour permit for the truck for each state for about $25.00 each, your problem will be your drivers license. since your rig has a rating of more than 26001 lbs you need a cdl. even if you drive around empty all day if your vechial is rated or capable of carring more than 26001 lbs you are counted or at least this is the way the scale man explained it to me. so I came home and looked in my own cdl book and I will type word for word and you draw your own conclusion. YOU MUST HAVE A CDL TO OPERATE ANY OF THE FOLLOWING COMMERERCIAL MOTOR VEHICLES (CMV) A- A SINGLE VEHICLE WITH A GROSS VEHICLE WEIGHT RATING (GVWR) OF MORE THAN 26,000 POUNDS B- A TRAILER WITH A GVWR OF MORE THAN 10,000 POUNDS IF THE GROSS COMBINATION WEIGHT RATING IS MORE THAN 26,000 POUNDS. hope this helps you out.if you know some one with a cdl that is willing to make this single trip for you than you can go that route. the phone number to find the closes COMDATA TRANSCEIVER SERVICES is 800-527-0665 or 800-888-9103. this is where you can get a tag permit for the truck.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Tractor Traction - by Chris Pratt. Our first bout with traction problems came when cultivatin with our Massey-Harris Pony. Up till then, this tractor had been running a corn grinder and pulling a trailer. It had new unfilled rear tires and no wheel weights. The garden was already sprouting when we hooked up the mid-mount shovel cultivators to the Pony. The seed bed was soft enough that the rear end would spin and slowly work its way to the downhill side of the gardens slight incline. From this, we learned our lesson sinc
... [Read Article]
Latest Ad:
WANTED Front grille/nose assembly for Massey Ferguson 1160 (also fits 1180 & 1190). Headlight-mount section. AGCO Grille 3706022M91 (supersedes 3705942M91), cover 3705494M1/M2, holders 3705501M91/3711158M92. New/NOS/good used OK. Jonesboro, AR - will pay shipping. Photo appreciated. Thanks
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|