|
Tractor Talk Discussion Board |
Re: Re: Re: People with NO respect!
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Lil-Farmer on August 10, 2003 at 18:41:20 from (208.194.0.64):
In Reply to: Re: Re: People with NO respect! posted by Jason on August 10, 2003 at 18:13:35:
I don't have any old iron, except what I use, none for show. My son and I do have a race car that we are pretty proud of and we do make the mall shows around the area in the winter months. Out of maybe 50 cars that will be at any of these shows, we are one of the few that allow kids and/or adults to sit in the car. We put the child in the car and watch what they do while in it, it is not unsupervised. We even take a digital picture and email to the people if they want. Everyone else will have rope barriers around their display to keep people away. We did a show for the Make a Wish foundation and let me tell you it was most gratifying to see these kids with terminal illness's lined up waiting to get in the one and only car that would allow it. Sure, there were a few scratches when it was over, but a week of paint work wouldn't have put a stop to our letting people do something they may never have another opportunity to do. Remember, these kids are the future of anything we do. If they have a bad experience (or uninteresting), when they are old enough to go on their own and take their kids, they probably won't show up at your show. I guess then you won't have to worry about it! This was pretty long, so I suppose it's a nickle's worth.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
