Re: coil replacing a magnito

Posted by wh on August 10, 2003 at 06:36:48 from (208.61.210.66):

In Reply to: coil replacing a magnito posted by Dave on August 09, 2003 at 19:24:41:

take the top off your mag coil. cut the wire going from your coil to the condenser. cut it "clean" and cover it if possible. put he top back on the mag. mount a coil anywhere it is handy. i made a small bracket and put it between the oil filter and mag. run your wire from the switch to the coil an dfrom coil to the terminal on the outside of your mag. you will need to either buy a coil with internal resister or put one between your switch and coil to get the current back to 6v. have a setup like this that was done about 30 years ago and still works liek a top. wade

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: coil replacing a magnito Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]