Re: Please help me set up my Brush Hog!

Posted by Eldon on July 17, 2003 at 08:17:06 from (209.240.198.61):

In Reply to: Please help me set up my Brush Hog! posted by Tim on July 16, 2003 at 20:11:15:

If your tractor doesn't have a "hold" position on the hydraulics, you will have to use chains to keep the front of the mower at the right height. Use the tail wheel to set the height that you want to cut. Your top link should have some sort of slack built in. If it doesn't and you go through a ditch you can bend things up.....you can use a chain if the mower doesn't have a built-in slide or pivot mount. Also check to see that the slip clutch is working (if it has one), or if not, that there is a soft "shear" bolt where the pto shaft attaches to the gear box.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Please help me set up my Brush Hog! Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]