Re: 1945 H FARMALL � NEED HELP

Posted by RLS ia on July 01, 2003 at 19:39:55 from (207.192.229.46):

In Reply to: 1945 H FARMALL � NEED HELP posted by CARL PATTON on July 01, 2003 at 19:24:46:

Carl,
There is a plug in the front of the bolster, take it off, then loosen the U-joint, the side towards the rad. You may have to drive a cold chisel in the slot to loosen the U-joint where it clamps to the steering shaft,. Take a pipe wrench or channel lock pliers and turn the shaft. It should screw it self out the front. Then there are two bolts with springs on them above the front wheels that are fun to get at. Good Luck.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 1945 H FARMALL � NEED HELP Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]