|
Tractor Talk Discussion Board |
Re: international 444, 3 pt hydraulics,not working
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Alton on June 09, 2003 at 20:16:09 from (63.157.148.132):
In Reply to: international 444, 3 pt hydraulics,not working?? posted by maplehillfrm,pat on June 08, 2003 at 09:09:49:
i have a 444 Diesel the valve on the left side that has fast/slow. Slow is usually used with the draft control and fast with the 3-point lift. This valve is a flow divider. In fast the flow is approximately 5 gal. min. In slow about half that.
The valve on the right is an isolator valve. You turn it all the way in and it shuts off the flow to the lift cylinder.There is a Nut on the left side facing front that has a screen behind it. Which is the regulator filter. On the front plate between the two valves there is an orfice. There is a plate on top that you can check into aand see of any linkage is frozen up.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Tractor Implements and Their Use - by Curtis Von Fange. Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he reached his early sixties
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
