|
Tractor Talk Discussion Board |
Re: Re: Re: international 444, 3 pt hydraulics,not
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by maplehilfrm,pat on June 08, 2003 at 20:04:21 from (216.238.58.202):
In Reply to: Re: Re: international 444, 3 pt hydraulics,not wor posted by Ben with another thought on June 08, 2003 at 18:35:24:
thansk ben for the reply, yes it does have power steeringf and it actually works very well, I am going to check the fluids, all look good, but being I just picked the tractor up, I like to do that, the 3 pt has me kinda mad, but It can and will be fixed, I have to pick up a repair manual, so as to see what the hydro, mechanism look like, maybe the rod that actuates the quadrant rounded, some one told me, I will probably take the quadrant screws off and try,, thanks pat
other than that the tractor seems like a good one, going to make a nice addition to the others pat
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Tuning-Up Your Tractor: Secondary Ignition Wires and Distributor - by Curtis Von Fange. In our last episode we spent the entire day checking out the spark plugs. Is that efficency? Actually, it took more time to explain than it really did to do the inspection. At any rate we decided that a compression test was in order so we could verify the internal engine status. That way we wouldn't buy any tune up parts until we were sure that the engine was in reasonable mechanical condition. Our tests showed a fictional compression reading of 85, 80, 82 and 86 psi. That is well within a
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
