Re: Snowplow and old Farmall H

Posted by nor-ala on February 17, 2003 at 18:37:14 from (12.27.217.72):

In Reply to: Snowplow and old Farmall H posted by Tommy Boy in PA on February 17, 2003 at 18:13:22:

Tommy There are some threaded holes in the frame just below the radiator on each side that the cultivator fastens to as well as some holes along the side of the engine that you can use bolts and taps on, there are also 2 holes in the grill about 1/4 th of the way down from the top where 2 brace bars hook to , it is my estimation that if you can adapt the plow to bolt onto these holes that the tractor can handle it. good luck

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Snowplow and old Farmall H Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]