|
Tractor Talk Discussion Board |
Re: farmall 200 hydraulics
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by RayP(MI) on December 30, 2002 at 05:27:06 from (216.46.196.166):
In Reply to: farmall 200 hydraulics posted by Deamer on December 28, 2002 at 14:54:44:
The owner's manual says to remove filler plug, and drain plug on left side of unit, just in front of battery box. When fluid stops draining, run engine very breifly to drain fluid from pump and connecting pipes. There is also a strainer just forward of the drain plug, might be a good time to take out and clean. Refill capacity is 6 3/4 pints, 8 1/2 pints with remote cylinder, and 9 1/2 with fast hitch. Proper fill level is 1/2 inch below filler plug. If it is necessary to flush the system, they recommend flushing with hydraulic fluid, not kerosene, etc. Recommended fluid is "IH Touch-Control Fluid" - have no idea if it is still available. Some one else will have to speak to the available and best replacement fluids. Good luck!
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Tractor Implements and Their Use - by Curtis Von Fange. Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he reached his early sixties
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
