Re: Repairing Pitted areas on Exhaust Manifold.

Posted by Peter on December 01, 2002 at 14:26:51 from (167.17.4.53):

In Reply to: Repairing Pitted areas on Exhaust Manifold. posted by AWB on November 30, 2002 at 06:25:58:

It is normal for exhaust manifolds to have pitting. Sometimes they are so badly rusted that there are holes in the manifold. As manifolds are cast iron they can be repaired with a nickel welding rod after sandblasting and then ground but have never seen anyone do that much work on a tractor manifold. Best to oil it when you are not using your tractor to stop it from rusting too much.

Follow Ups:

• Re: Re: Repairing Pitted areas on Exhaust Manifold. Dave in Ohio 03:17:08 12/02/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Repairing Pitted areas on Exhaust Manifold. Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]