|
Tractor Talk Discussion Board |
Re: trailer
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Mr. Kioti on September 04, 2002 at 17:13:46 from (64.217.218.104):
In Reply to: trailer posted by Ed on September 04, 2002 at 07:48:24:
Hey Ed, That sounds a little pricy to me but it depends on several things, quality of the trailer being one and the options. Some things to think about. A 8N Ford and a 5' mower will have the tailwheel on the mower hang off the back of the trailer on a 16 footer so in my opinion I would look at a 18'. A tractor with a front end loader will also take up the whole trailer on a 16' leaving no room for any type of implement except for something short like a boxblade and possibly not even that. If you ask me, and you did not, a 16' is a bit short for my purposes, I like a 21' myself but that is just me. I would say 18 at a minimum for dealing with tractors. For $2500 I would be looking at gooseneck trailers, especially if you are gonna haul a tractor with a front end loader, just put the bucket on top of the gooseneck. Werks like a champ. Around my area you can get a 16' tongue pull trailer with pipe top and brakes on one axle for around $1100 plus all the taxes. JMHO, K
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Adding an Hour Meter - by Steven Gussey. This article tells how I added an electric hour meter to my 1942 Farmall H after rebuilding it. I wanted to keep an accurate maintenance schedule for my rebuilt engine and the implements I use with my tractor, but the H was never available with a tach
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|