Tractor Talk Discussion Board |
Tractor fatality -- be careful!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by ScottyNY on September 03, 2002 at 17:40:02 from (24.164.170.147):
Lost a neighbor Saturday. Bill was caretaker for an old fellow has about 300 acres, mostly woods. Bill was out cutting/cleaning up blowdowns and was late coming in, and his wife called a friend, who went back and found him. Near as it can be pieced together, he got his saw stuck in the stump (he had taken the engine off the bar) and then tried to spring the gap open by pushing the loader on the tractor (Ford *N) against the tree. Looks from Bill's injuries and the bent steering wheel like the tree gave first and kicked back instead of leaning forward. They found Bill about ten teet from the tree. The tractor ran on until the bucket fetched up on another tree. It was still running, had busted the chains and was dug down to the axle. This isn't a case of tying on wrong.It's a case of something you might get away with a hundered times, but the equipment doesn't provide the protection from that one in a hundred chance. The cage on a skidder might have saved him. Work safe, all!
Follow Ups:
Home
| Forums
Today's Featured Article -
Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|