|
Tractor Talk Discussion Board |
Re: Slip clutch maintenance - Howard rotovator
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by F14 on August 05, 2002 at 03:40:28 from (216.204.137.189):
In Reply to: Slip clutch maintenance - Howard rotovator posted by Bill Oakes NY on August 04, 2002 at 19:08:37:
No lubricant! Once the rust and scale is cleaned off, reassemble and snug the tension springs down equally. The adjustment is determined by trial and error the first time. Obviously, needs to be tight enough to drive the tiller in most soil conditions, but loose enough to slip if you fetch a root or a rock that jams the tines. The next time you take it apart to clean it up, note how many threads are protruding from the adjuster nuts (or how many turns it takes to get them off) and reassemble it to the same depth. That will give you a good starting point. As far as routine maintenance, some folks will advise backing off the adjustment a few turns, blocking the tines and letting the clutch on your tractor out slowly until the clutch on the tiller slips for a few revolutions, then tightening it back down. I suppose this would work if done regularly, but IMHO, you're taking a chance of tearing things up if the clutch has set up on ya.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
An Old-Time Tractor Demonstration - by Kim Pratt. Sam was born in rural Kansas in 1926. His dad was a hard-working farmer and the children worked hard everyday to help ends meet. In the rural area he grew up in, the highlight of the week was Saturday when many people took a break from their work to go to town. It was on one such Saturday in the early 1940's when Sam was 16 years old that he ended up in Dennison, Kansas to watch a demonstration of a new tractor being put on by a local dealer. It was an Allis-Chalmers tractor dealership,
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
