Re: loader hydraulics problem/troubleshooting questions

Posted by rhduson on June 21, 2002 at 12:23:30 from (65.161.23.254):

In Reply to: loader hydraulics problem/troubleshooting questions posted by Dave on June 20, 2002 at 12:09:52:

shift the valve to fully extend the bucket cylinders. take the rod side hoses off the cylinders. go back to the the bucket valve, shift the lever to extend the bucket (its already extended) the oil (if any) you see coming out of the open rod ports are the leaks past the piston seals or the o-ring between the piston and rod. i'll bet its the piston seals. not alot to go bad in a valve or a pump if the oil is kept clean.

Follow Ups:

• Re: Re: loader hydraulics problem/troubleshooting questions so where to get seals for the cylinders? 16:26:26 06/21/02 (2)
  • Re: Re: Re: loader hydraulics problem/troubleshooting questions rhud 18:04:39 06/21/02 (1)
    • Re: Re: Re: Re: loader hydraulics problem/troubleshooting questions Dave 18:14:13 06/21/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: loader hydraulics problem/troubleshooting questions Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]