|
Tractor Talk Discussion Board |
Re: Re: Re: loader hydraulics problem/troubleshooting questions
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by rhud on June 21, 2002 at 18:04:39 from (12.43.219.254):
In Reply to: Re: Re: loader hydraulics problem/troubleshooting questions posted by so where to get seals for the cylinders? on June 21, 2002 at 16:26:26:
if i have a day or three to wait. i usually try Baum Hydraulics (800-228-9222). i did not see the 710 listed, but they are pretty good at finding parts. measure the rod diameter and have a good guess at the piston diameter before you call. if that doesn't work, you will have to carefull take apart one cylinder and measure the old parts. they sell parts as a kit or individually. i forgot to warn you of the dangers or working around raised buckets. but you already knew that. good luck and let me know how it goes.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
