|
Tractor Talk Discussion Board |
Re: Buying a tractor without seeing it - am I crazy?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Steve - IN on June 17, 2002 at 01:49:46 from (12.222.1.20):
In Reply to: Buying a tractor without seeing it - am I crazy? posted by Steve on June 16, 2002 at 09:16:12:
Steve, I think you've got to start with the premise that the vast majority of Americans are basically honest. If that wasn't true, all kinds of remote commerce -- like internet sales -- would disappear. If you ask enough questions, sometimes more than once and in a few different ways, plus get lots of pictures and so on, you should be OK. I've bought and sold all kinds of stuff remotely, and haven't had many problems. I think your parameters are fairly tight, though, which is going to lessen your odds. Loaders add a lot to the value of a tractor. So a tractor with a loader in your price range is going to be fairly old, say 40 yrs or more, ... and may be a narrow front.. which get a little wobbly lifting heavy loads up high. The other thing is, a loader is wonderful when you need it. Which may be 5 to 10 per cent of the time. The other 90 to 95 percent it's a big, bulky pain hanging off the front of your tractor. Least that's my feeling toward my loader. I got one of those 3 point carry alls for the back of my other tractor and bolted some plywood to it. It actually handles things that are too wide for the loader bucket, like fence posts. Maybe one of those 3 pt rear dirt scoops plus the carry all would be a workable substitute for a loader... least if you didn't have to lift things up high. In any event, best of luck in your search. Steve
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
12-Volt Conversions for 4-Cylinder Ford 2000 & 4000 Tractors - by Tommy Duvall. After two summers of having to park my old 1964 model 4000 gas 4 cyl. on a hill just in case the 6 volt system, for whatever reason, would not crank her, I decided to try the 12 volt conversion. After some research of convert or not, I decided to go ahead, the main reason being that this tractor was a working tractor, not a show tractor (yet). I did keep everything I replaced for the day I do want to restore her to showroom condition.
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|