Re: Hay Mower, Bar Cutter Replacement Question?

Posted by Rod (NH) on May 20, 2002 at 19:43:08 from (207.3.148.150):

In Reply to: Hay Mower, Bar Cutter Replacement Question? posted by BlueLite on May 20, 2002 at 18:34:28:

Hi BlueLite,

My 5 ft AC sickle mower indicates that those hold down fingers, called knife clips, should have a slight clearance with the knife sections..."thickness of a post card" is called for. You adjust by bending the clips as required.

I would assume this to be a pretty universal thing. My mower is vintage 1942. I don't think any hardfacing is called for. I lube my bar and knife sections with motor oil every so often as the manual calls for. Other people don't bother to do that I understand.

Rod

Follow Ups:

• Re: Re: Hay Mower, Bar Cutter Replacement Question? BlueLite 19:57:26 05/20/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Hay Mower, Bar Cutter Replacement Question? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]