Re: Shop Floor - Need opinions

Posted by poorerbut on April 09, 2002 at 13:15:16 from (207.0.239.124):

In Reply to: Shop Floor - Need opinions posted by Jason on April 09, 2002 at 04:52:44:

Jason: I don't pretend to have control over your
check book. I can't even control my own (Director
of Finance and Marital Affairs watches it pretty
closely) Consider just a couple of things, though.
1)moisure barrier on top of compacted base gravel
2)over-kill on re-bar (reinforcement) where you
will have the heaviest weight.
3)10' x 20' is an awfully small work area for
most tractors (a 50-60-70 or A-B-G will eat up
8 foot width real fast.)
4)you can drop plastic and partially heat, so
consider a 50% pour now-50% pour later. Better to
have half of it right than all of it done half
right.
5)chips and dust can be wetted down and compacted
and holds in most climates and makes a decent
base if you don't have a water problem.
Just some things to think about. Good luck.pb

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Shop Floor - Need opinions Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]