Manifold Hole

Posted by Jim on February 18, 2002 at 14:17:17 from (64.12.96.202):

The manifold on my 153 Buda has a small hole near
one of the exhaust ports. I hate to take it off
and a welder wants 75.00 to repair in place. Can
I use JB Weld or some product like it?. I do have
a brazing setup, but what type of rod and flux?
Also do I have to preheat the part? Thanks for
any help.

Follow Ups:

• Re: Manifold Hole Dick L 11:36:05 02/19/02 (0)
• Re: Manifold Hole G.W. 00:42:22 02/19/02 (0)
• Re: Manifold Hole Franz 19:39:55 02/18/02 (0)
• Re: Manifold Hole steve 15:27:20 02/18/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Manifold Hole Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]