Re: Loader Hydraulic problem

Posted by John in Maryland on February 17, 2002 at 12:00:46 from (66.56.220.94):

In Reply to: Loader Hydraulic problem posted by Greg Z on February 17, 2002 at 07:26:44:

If there is air in the lines, you can loosen the line connections in a few areas, with the tractor off and loader all the way down. You may hear air escaping then wait till steady flow of oil comes out, retighten. Do not completely take lines apart at fittings, just loosen about 1 turn or so. Kinda messy, but should help if you have air in the system. Just make sure bucket is flat, and loader down, as once you bleed it, the pressure will come off, so you don't want it in a position where it will fall. Hope this helps.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Loader Hydraulic problem Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]