Posted by dhermesc on May 04, 2023 at 06:03:37 from (12.149.56.202):
In Reply to: Re: Sewage sludge posted by ss55 on May 03, 2023 at 09:13:00:
We build water treatment and wastewater treatment plants, no way is the city going pay to treat rainwater. And it will quickly overwhelm a plant. We have built them for Topeka, Tulsa, Wichita, Oklahoma City, Salina, Hutchinson, Abilene, Manhattan, Lawrence, and hundreds of other cities. You just can't send rainwater down the sewer lines - first they are not big enough, and the run off from a city with huge areas cover by buildings and pavement is tremendous - much more than a simple rain on open pasture or worked ground. Every single rain event would result in a huge release of water and sewage - not to mention the fact that the plants that use microbes to break down sewage would end up with a plant that wouldn't work.
The City of Topeka has an issue with their lines breaking - the plant near Shunga Creek seems to keep breaking pipes and releasing sewage into the creek that flows to the Kansas River. Every time it breaks they issue a warning to stay way from the Creek and for God's sake don't go into the water. They don't issue that warning every time it rains.
As for a mayor not knowing his infrastructure - a guy can own a home and not know where his water lines and sewer lines are. The head of the utilities department knows the infrastructure - the mayor knows when the Farmer's Market opens.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
