Posted by WAYNE-N-TEXAS on January 29, 2023 at 05:54:07 from (47.160.46.10):
In Reply to: Hey IaLeo-- posted by big tee on January 28, 2023 at 18:17:06:
I have a home made cannon. I bought it off Craigslist. It had wheels lie that. So I decided to make it look more real. I bought cannon wheels with axles off the internet. The barrel was 4 inch schedule 160 cs pipe. I bought a 4 x 6 reducer, cut the 4 end to slip over the barrel. Welded it on, cut a donut out of flat plate, welded in across the gape of the barrel and reducer. I drilled and taped the rear of the barrel. Using a small funnel put the powder in screw the plug with 1/8 hole drill to put the fuse in. I can shoot one ounce of black and send a 15.5 oz can of beans, carrots or what ever on sell all across the hay field length wise approx 1000 ft. Sorry I dont know how to post pictures.
You can have fun with it also. You can get colored corn starch from the internet to have different color discharge smoke or even shoot blue or pink at a reviling party.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Diesel Vs. Gasoline - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: " I am in the market for an older tractor (to be read... cheap). I have been told a diesel holds up better than a gasoline engine as far a wear, tear, neglect and abuse. Since I am looking at older tractors that have probably been through it all, is it better to buy diesel? I do expect to have to do a good bit of work on
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
