Posted by caterpillar guy on August 21, 2022 at 00:55:45 from (47.26.95.42):
In Reply to: Auger Cart ID posted by crsutton81 on August 20, 2022 at 17:40:31:
Just from past experience with augers in bin if you leave it like it is you want to use a tractor with a closed center system on it. Otherwise the hydraulic auger will not run very fast to keep up with the pto side of things. We had a seed auger in a bin and an 8inch pto auger to the truck. ran it with a 674 which would run both augers. But the hydraulic lagged behind in speed. I know there was a difference in sizes and that makes some difference. but the 6inch hydraulic was slow running without speeding the engine up and then the pto was running way faster than it needed to. Just my observation from that. If you look at a Kinze cart you will see how they connect up on the gearbox and chain arrangement. Probably can contact Surplus center for a gear box for it. I'm sure KInze could also fix you up for a price too.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - What Oil Should I Use? - by Francis Robinson. I keep seein this question pop up over and over again in discussion groups all over the web. As with many things there are often several right answers and a few wrong ones. Some purist I'm sure will disagree to no end with what I will tell you but most of us out here in the real world don't really care do we ? Some of them only bring their noses down out of the air long enough to look down them anyway. If you are like me you are only doing this old tractor stuff because you enjoy it. You
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
