|
Tractor Talk Discussion Board |
Re: No till vs min till, so far
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by paul on June 13, 2007 at 08:49:23 from (66.60.197.9):
In Reply to: Re: No till vs min till, so far posted by Dave from MN on June 13, 2007 at 07:21:04:
If a little rain comes at the wrong time, rye can get away on you before you spray it - too tall for the corn to compete. Just be aware of that, have the disk/ multcher waiting. Down here in southern MN in my 120 foot deep clay soil from Canada we need to get rid of moisture & add heat, so no-till just doesn't work. Think I'd still be planting corn if that were the only option.... I'm hoping strip till works out, & the price of that equipment drops into my price range. (Cheap used.) This is a real hot-topic on some discussion forums, like politics or religion. Gotta be careful what you say sometimes. :) Notill vs tillage, like the cattle/sheep wars of the western range. Put 110# of starter on all my corn, 5-27-20 or whatever those last 2 are. My soils tested fair to almost fair for P & K last fall. Most corn is on bean ground, 120# of NH3 applied in spring. Few acres are corn on corn with close to 200# of NH3. Few acres was an oats field, had cattle manure applied last fall, nearly headed oats regrowth plowed down in fall. NH3 this spring. Very sandy light soil, this field often looks poor with corn on it. Few acres were 5 year old alfalfa field fall plowed, no NH3 added, just the 5lbs of starter. A very few acres are direct seeded into a pasture I grazed early, only starter on it so far. Planted late, I'm evaluating wether to spray out the grasses & sidedress N, or let the cattle graze out the corn later.... Just a test, with everything stacked against the corn getting a chance.... So far the best looking field is the alfalfa patch, followed by the manured patch. I do not plan any extra N on the alfalfa patch, & exepect it to yield as good or better than the rest. Planting dates & so forth play into it, so nothing scientific, but interesting to see the different situations unfold. --->Paul
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Weldin Basics, Part 3 - by Curtis von Fange. Oxy-acetylene Welding - Part One In our series on welding we have taken a brief look at AC and DC arc welding along with basic techniques and safety equipment required for safe usage. Since our premise is to cover welding types that might best be used on a farm environment we have kept our overview purposefully simple and general. The second type of welding that this observer finds quite useful in
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|