Posted by FrogCreekRanch on August 08, 2021 at 16:52:14 from (66.119.206.226):
Hello all,
Long time viewer of this forum and figured I should start contributing and posting.
Just got myself a 1988 Ford 6610. Was able to get it really reasonable at $6500. Plan to use this tractor to run my swather, Stackliner and maybe some harrow work. Couple things on this tractor I have questions on and one problem I'm trying to address.
Does the injection pump on this tractor need to have its own oil changed or does it run off the engine oil? It's a Lucas injection pump and from what I can tell, this one didn't come factory on this tractor? Waiting for the operators and service manual so I am unsure at the moment. It looks like there is a drain plug and a fill plug.
The problem I am currently running into is the starter or starter solenoid. Once every 4 or 5 starts all the starter wants to do is "spin". The previous owner told me its a remanufactured starter and from the looks of the starter I believe him. It looks new. I tested the battery with my meter and it's reading normal. Do solenoids intermittently fail or is there something else I should check?
This post was edited by FrogCreekRanch on 08/08/2021 at 04:52 pm.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
