I have cut hay with just about everything except a scythe. I have a 488 NH haybine cuts in nearly any conditions, but you do have a back swath to cut. 9 foot cut, low hp required . I bought it new 30 years ago. And can still buy parts for it, no problem I also have a 12 foot cut JD swather with conditioning rolls. I just love cutting hay with this machine, maybe my favourite way to cut hay.. I just cut 2 passes across both ends of the field, then start going up and down the longest side till I am all the way across the field. No strike outs, and perfect for irregular shaped fields. Down side is, hay always lays in a windrow, so it does slow drying time. And JD no longer wants to support this machine with parts. Something you want to watch out for when buying older hay equipment. Does the company that built the equipment still support it with parts? Is the company still building hay equipment? Gehl does not. And my third option, my 3 pth discmower ,This mower cuts near 10 foot, cuts cleanly under all conditions, and never plugs. No conditioning rolls, but lays hay out flat, and it seems to dry just as fast as conditioning hay then leaving it in a tight windrow. Wants a fairly heavy tractor to carry the weight. And you can cut as fast as you feel comfortable driving the tractor across the field.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
