Posted by Case Nutty 1660 on July 09, 2020 at 04:00:47 from (75.127.27.51):
In Reply to: Case 970 Oil posted by 70Ford on July 08, 2020 at 20:19:11:
What the book is telling you to do is fill the splined area in the flywheel with grease before you slide the halves back together, this lubes the splines deep in the flywheel where oil is slung out,, I always use the same grease I use in my grease guns, and I use a high temp lithium high quality grease rather than the basic cheap grease, as far as a IT sm they are better than no book at all but are just above nothing,, they do have a lot of info in them but it seldom separates it in a way most can understand easily, as far as hyd oil I highly recommend only hy-tran in them,,they call it some other name now but it is what works 100% Best in them,, as cheap oil is just a time bomb,, I say this as I have been selling repairing and running them since they came out in 1969,, so take my recommendation if you like or use what you want matters not to me,, but I will say these are not pace to be cheap about oil, also use the 51515 cnh aerobic flange sealant on the bellhousing/transmison flanges if you want it to seal and not leak cleaning prep here is a must, silicone here is a huge mistake but again use what you want its yours cnt
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
