I understand that there were 4 or 5 different block configurations, theres got to be a cross reference book, or at least an illustration of the differences between the engines/blocks. I'll pay for it to give me answers, and this is a very common engine internally.
There must have been some successful conversions or otherwise they wouldn't sell a bell housing adapter plate at tractor stores.
So far I've found:
1. A diesel AG3.152 block from a massey tractor that I believe will fit the application, but its very bare bones.... just the block, no oil pan.
2. A perkins Gas 3.152 off of a massey nearby....I'm wondering if that engine would be a direct fit in its own right... or if the oil pan is the same as the diesel.
3. Old welder equiped with a running D3.152. (CE model, which crosses to D3.152 on the perkins site, and was used in agricultural tractors)
4. Adapter plate for perkins 3.152 flywheel to fit massey bellhousings.
So far I've found a decent set of guts, a good block, and a possible rebuildable gas engine or an oil pan. Just need a way to verify that something will not work, or will work other than their memories.
Thanks for all the idea spitballing guys.
Not gonna pour concrete in the z134 btw. I'm gonna start parting out the good parts to help pay for this diesel or gas 3.152 engine, whether its directly off of a parts tractor or not.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - History of the Nuffield Tractor - by Anthony West. The Nuffield tractor story started in early 1945. The British government still reeling from the effects of the war on the economy, approached the Nuffield organization to see if they would design and build an "ALL NEW" British built wheeled tractor, suitable for both British and world farming.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
