Posted by Rob Mo. on April 09, 2020 at 17:29:14 from (71.86.47.210):
I am working om a power washer that had been sitting for a couple years. Got the engine running, Honda GX-200, the pump is a Cat 3DX29GSI model. Hooked the water up to it & it has all kinds of pressure. When I release the trigger, it kills the engine. So, the unloader valve isn't working even after adjusting it. Took the adjusting cap off & the spring was rusted & seized. Naturally what does one do in this situation, he get a pair of pliers & tries to free it. It broken of course!!! Now I have located a spring on a site called ALLPARTSINC.com for $11.81. The Cat Pumps says when you rebuild an unloader to get all the o-rings & seat replaced as well. I'm just wondering if any of you have an idea where I could find a 3/8" or 7/16" spring that is 1 1/4" tall, must have the stiffness of a engine valve spring.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Crank Start a Tractor - by Staff. This interestin discussion is from the Tractor Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
