Posted by Billy NY on February 03, 2020 at 17:11:26 from (74.70.87.149):
In Reply to: The cole planter posted by larry@stinescorner on February 03, 2020 at 16:00:32:
Larry,
Click on the links below, looks to be an earlier model with the cast or steel lids. I am not sure what may have changed in between, but would guess they are quite similar or the same, yours and the 12MX model shown. There is a link to manuals in the 2nd link.
I cannot think of a more useful tool for you to have seeing the garden plots and strips you have. You will probably need to check out how it's calibrated. Maybe you can run it over a large tarp and see the spacing of the seed and how it is performing. I've longed for one like the Planet junior or possibly one of these, but likely won't need to plant that much. I have planted a 50'x70' patch all in sweetcorn before, it grew nicely. I would also need a 2 row cultivator for the weeds, then again the troy built horse might do that just as well.
Can't wait to see it in action and hear about how it works.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Measuring with Calipers - by Staff. The legs of inside calipers are curved outward at the extremities to facilitate measuring small holes, while outside caliper legs have a large curve inward to increase their capacity for large work. Firm-joint calipers are adjusted approximately by the hands and then set to the feel of the work by tapping them on a metal surface. It is a common practice when opening calipers by this means to tap the top of the joint. It is better, if possible, to tap the inside of the legs, as repeated blo
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
