Posted by notjustair on December 25, 2019 at 19:01:13 from (98.188.112.49):
This is a new one to me. I’ll try to be brief.
Bought a Deere 323D skid steer new. At about 600 hours the oil return line for the turbo sprung a leak and it caught fire. The dealer repaired it but it was plagued with gremlins. Four new head gaskets. New head. New hydraulic pump. Each time it came home with a new malady. In the end it started making oil at a pretty good rate and they couldn’t figure it out. Two sets of injectors. Two rebuilt pumps. Transfer pumps. The list went on and on. I was almost ready to throw in the towel when they brought out a loaner because it began overheating after 10 minutes of run time. The owner of the dealer has always been good to me and would do anything to make things right for the folks who have been by him since he started.
The loaner is a 323 E and I’ve had it about 18 months now. Yes, 18 months. I’ve asked him to quote me a price to trade and he says don’t worry, we’ll figure it out. I’ve put 250 hours on this one and it’s a good machine. Better than the other ever was. When he quotes me a price I’ll buy it.
The other day I checked the oil and it is 3/4 inch over full! I haven’t checked it in a while, but there is 125 hours on this oil change done by me and filled right to the full line. They told me this is a completely different engine, but how can it be making oil, too? I’ve put tens of thousands of hours on tractors in my farming career. I owned and drove school buses. I’ve got diesel pickups and semis. I know there are exceptions (like when the IC buses came out), but I have NEVER had an engine make oil. What is going on?
I don’t idle them. I don’t overload them or lug them. I use them respectfully and don’t abuse machines. It gets to operating temps each time I use it and usually run it on something like a tree puller so it isn’t putting around feeding a bale or something. Heck, I’ve got the 4020 that came here new with 24,000 hours and one rebuild on it now and it only uses oil when it gets dirty and close to an oil change. I’m sure it isn’t me. I would have never made it farming all these years without going bust if I ruined every engine.
Any Ideas? Oddly, this one has about as many hours now as the D did when it started making oil. They replaced everything trying to figure that out and it still sits behind their shop. A young service tech actually asked me if I thought that someone might be sneaking up to the farm and adding oil to it without me knowing. You can bet how well that went over! It’s just a puzzle to me.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Hydraulics - The Basics - by Curtis Von Fange. Hydraulics was one of the greatest inventions for helping man compound the work he can do. It’s amazing how a little floor jack can lift tons and tons of weight with just the flick of a handle. What’s even more amazing is that all the principals of hydraulic theory can be wrapped up in such a small package. This same package applies to any hydraulic system from the largest bulldozer to the oldest and smallest tractor. This short series will take a look at the basic layout of a simple hydraul
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
