Posted by Adirondack case guy on November 07, 2019 at 16:27:12 from (74.65.90.205):
I started this 37A field yesterday. Caught into a limestone ledge and broke the mounting plate off the #2 beam, so spent the afternoon welding and repairing the broken beam. Had a pretty good day today, in spite of breaking 2 new landsides. The Weise landsides seem to be brittle and break thru one of the mounting holes every time. I finished off 2 of the 3 lands even with a broken landside and missing brace on the #1 bottom. Only had 1 bout to finish it. Tomorrow morning I am going to weld up and reinforce two broken landsides making one, and see if that works.The breakage really puzzles me because the plow pulls perfectly straight as you can see in the pics. I have the hydraulic reset system pressure set as low as possible to keep the bottoms set in working position.
This field has many slopes in several directions from one end to the other.
The farther I get down the field towards the pond the wetter it gets. Water seeps down to the ledges and then runs out of them where they outcrop from the slope. The ruts that are in one picture were made when the field was sprayed to kill the over growth.
The rain turned to snow this afternoon. My cousin Kevin tried combining some corn yesterday, but moisture is 26-30%. Still need some good weather to dry things out. At least this year the beans are done, before snow fall. Last year we had snow on the 9th and could not get 30 plus acres of beans that would not dry down. There are still a lot of beans and corn standing in the fields around here.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - History of the Nuffield Tractor - by Anthony West. The Nuffield tractor story started in early 1945. The British government still reeling from the effects of the war on the economy, approached the Nuffield organization to see if they would design and build an "ALL NEW" British built wheeled tractor, suitable for both British and world farming.
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
This field has many slopes in several directions from one end to the other.
The farther I get down the field towards the pond the wetter it gets. Water seeps down to the ledges and then runs out of them where they outcrop from the slope. The ruts that are in one picture were made when the field was sprayed to kill the over growth.
The rain turned to snow this afternoon. 
Well, that's it Folks. For today anyway.---Loren