Re: Need instructions to wire Delco Alt.

Posted by Duey (IA) on January 16, 2002 at 15:04:34 from (207.177.85.249):

In Reply to: Need instructions to wire Delco Alt. posted by don on January 16, 2002 at 12:48:30:

Don,
The red wire should be hooked to the big battery connection on the back of the alternator. The white wire is the one giving you the feedback. Two ways to correct the problem. 1. Install a diode in line or 2. Use an automotive ignition switch so you can seperate this wire from the wire that feeds the coil. White wire to acc, with coil wire to ign. NAPA part #( KS6116 is for distributor and used with original pull or push start )
( KS6180 is for distributor and used with a solenoid for key start - Starter terminal must be
changed to bolt type if removing manual connecter)
Duey

Follow Ups:

• Re: Re: Need instructions to wire Delco Alt. Jon Hagen....................One more way 17:20:57 01/16/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Need instructions to wire Delco Alt. Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]