Posted by Hobo,NC on October 20, 2019 at 07:44:48 from (75.137.54.87):
In Reply to: Oil Change posted by John in La on October 19, 2019 at 11:24:38:
Ford Ecoboost owners
Remove the oil filter first if you don't all the oil will not drain out of the engine, Some Saturn's are the same...
Nice tools for the job.
1) Oil filter cap wrench.
2) Oil plug removal tool Google OTC Tools 5911A Drain Plug Pro Magnetic Remover You will fall in love with this tool. Once the oil plug is broke free if the oil plug does not spin out free you need a new oil plug. This tool is 2 sided where it fits the hex on the drain plug the cheaper ones are one sided : (
3) oil drain funnel. Form-a-Funnel
4) Gearwrench Vortex socket system
5) for the messy ones a lid off a large trash can.
To drive oil change places crazy tell them you want a good filter not a house brand are a parts store house brand. If you look at the specifications they will list it as a 5K only filter do not use it on extended OEM recommended oil change intervals. This is a feel good issue so feel good about the parts you install.
If a shop is gonna sale you cheap arse oil filters what other cheap arse garbage is he gonna sale you to make a buck...
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.