Posted by 330 Standard on October 16, 2019 at 05:53:49 from (198.70.164.145):
I have a couple of JD carbs I need to get overhauled as they are beyond my expertise and need nozzles drilled out etc. I had a JD M carb redone by Denny's over 15 years ago. That tractor sat in my shop close to 10 years stored and finally about a month ago I pulled it out and it fired right and up ran great. Contacted Denny's repeatedly to see about sending these to them and finally got an answer "NOT Interested" which I thought was rather rude and as I understand it they have gotten very hard to deal with and quality has went down. I had a carb overhauled by another prominent advertiser that needed the nozzle threads repaired and spent over $300 for my 330 and it ran great about a month but now floods terribly. I have taken it apart and checked float height and the float for leaks as well as put in a new needle and seat just to try to eliminate the flooding and no luck. I suspect that when they restored the nozzle threads something is not right there but I canty find it. Another provider has quoted me between $400 and $500 per carb so before I drop a fortune Id like some feedback on who the readers out there recommend.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
