Re: ford 8N carburetor

Posted by buckeye al on January 10, 2002 at 14:44:59 from (208.24.179.129):

In Reply to: ford 8N carburetor posted by will on January 08, 2002 at 18:49:22:

Don't know if that carb has replaceable throttle shaft bushings or not. If not forget this post. If it does, make sure that the end of the bushing meets up with the inside bore of the carb. If it doesn't air will bypass the throttle plate ('specially at idle) & things just won't work right. Found this on a Minnie Z that ran like crap. Somebody had drilled out the throttle shaft hole (presumably well worn) & installed his own bushings but they were short & allowing throttle bypass. Pushed the bushings in farther & he calmed right down.

Good luck.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: ford 8N carburetor Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]